Quality. Uninterrupted.

The F120 is everything you expect from Stratasys: Accurate results, user-friendly interface and workflow, and durable 3D printing hardware. Our industrial-grade reliability means low maintenance compared to others. Proven to print for up to 250 hours, uninterrupted with our new, large filament boxes. Prints 2-3 times faster than the competition, making for a fast return on investment.

Plug. Print.

Why wait to print? The Stratasys F120 is easy to install and set up, whether you’re new to 3D printing or not. Ease of use comes standard with GrabCAD Print machine control software. Dramatically simplify your workflow and see how the Stratasys F120 sets the standard for ease of use. No specialized training. No dedicated technician.

We challenged the competition. And came out on top.

The Stratasys F120 outperforms the competition. But don’t just take our word for it. Over 1000 hours were spent independently testing a number of key build attributes, including feature reproduction, part sturdiness and surface quality. The Stratasys F123 Series and its engineering-grade materials came out on top.


System Size and Weight

889 x 870 x 721 mm (35 x 35 x 29 in.), 124kg (275 lbs)

Noise Specification

46 dB maximum during build, 35 dB when idle


Parts are produced within an accuracy of +/- .200 mm (.008 in), or +/- .002 mm/mm (.002 in/in), whichever is greater.

Network Connectivity

Wired: TCP/IP protocols at 100 Mbps minimum 100 base T, Ethernet protocol, RJ45 connector
Wireless-ready: IEEE 802.11n, g, or b; Authentication: WPA2-PSK, 802.1x EAP; Encryption: CCMP, TKIP

System Requirements

Windows 7, 8, 8.1 and 10 (64 bit only) with a minimum of 4GB RAM (8 GB or more recommended)

Operating Environment

Storage: Temperature: 32 – 95 oF (0 – 35 oC), Humidity: 20 – 90% RH
Operating: Temperature: 59 – 86 oF (15 – 30 oC), Humidity: 30 – 70% RH

Power Requirements

100–132V/15A or 200 – 240V/7A. 50/60 Hz

Regulatory Compliance

CE (low-voltage and EMC directive), FCC, EAC, cTUVus, FCC, KC, RoHs, WEEE, Reach

  • Available Material: ABS-M30TM, ASA, SR-30 Support material
  • Build Tray Dimension: 254 x 254 x 254 mm (10 x 10 x 10 in.)
  • Build Train Dimensions: 2 total (external), 1 model / 1 support
  • Software: GrabCAD PrintTM


Compatible Materials: